MACHINES

REF	Name : BC 500
275	Block cutter
The merger of two essential elements in just one machine: speed and precision. Precise and repetitive positioning is possible thanks to a mechanical system that step feeds the material. During the cutting phase, the loading clamp returns empty, minimising idle times, all to the advantage of production. Thanks to the expertise of our Technical Office, BC 500 maintains the typical characteristics of sturdiness and quality, guaranteeing (as one of its distinguishing marks) a working cycle equal to 50 strokes a minute. BC 500 is equipped with an automatic loader that can hold up to a maximum of 10* small beams (* 100x100mm beam cross section).       According to the type of production the machine can be fitted with: - twin collet feeding device, allowing two beams to be positioned simultaneously (max. dimensions of single beam 120x120mm), thus achieving double the production quantity in the same production time; - a double stepping device, for cutting multiples of the maximum permitted length; - an automatic system for cutting a long piece - short piece, alternated; - a device to recover the short pieces from other processes; - a heat stamp BC 500 can be combined with other operating lines like, for instance, a riveting-machine. For this purpose the possibility has been studied to install an automatic selection and unload device of the top and tail end waste on the standard model which is useful for supplying the product net of waste. An automatic stacker, to be combined with the machine loader and guaranteeing line feeding for up to 4-5 hours **, is an obvious advantage for machine production and for limiting production costs. With this device the whole production line can work without supervision. The machine is completely controlled by a PLC, making it fast and easily accessible by the operator   (** based on the sizes of the packs loaded on the stacker) See plan BC 500

Courtesy of Livenza Engineering. All rights reserved